Product Search

Basket:

Checkout

Submit your email address below to be kept up to date with all the latest news and offers from Skyview.
Privacy Policy

OMC-131 Wind Display

show your currency

The OMC-131 True wind display is specially designed for easy read out of "true" and "relative" wind information on board sea going vessels. The unit is suitable for panel mounting as well as mounting into a standard 19" rack. Any inclination is allowed and no additional control units are required.

Information from a GPS is required for calculation of the true wind; when this data is invalid, or at low speeds, the display uses headings from the Gyro and speed from the log. Relative wind direction is indicated within a double circle relative to the longitudinal axis of the vessel. Both circles consist of 36 LED's for average direction and variation. Inside these circles numeric displays indicates the corresponding relative and true wind speed. The unit was primarily intended for use with the OMC-160 wind sensors, but most other sensors can be connected to the system.

Please call or click on the link to send us an email for a systems quote on this item.

Technical Details

Features:
> Can contribute in finding most economic route
> Ship speed & heading from gyro and log and/or (D) GPS
> Scaling in m/s, km/h, kts, mph and Beaufort
> Selectable averaging interval time in 2 min. 10 min. or user programmable
> Indication of gust and minimum wind speed
> Indication of actual ship speed and heading
> Operation with 1 or 2 wind sensors
> Brightness control (remote brightness control optional)
> Compatible with most common wind sensors
> NMEA output for true and relative wind speed and direction

Specifications:
> Two LED circles 36 LED's for true and rel. wind direction
> Four 3 digits red LED displays size 14.3 mm height
> Two 3 digits red LED displays size 10 mm height
> Power Requirements: 230 VAC, 115 VAC, 24 VDC and 12 VDC optional. 30VA max.
> Inputs: 1 digital pulse input / 1 analogue input (potmeter) / 4 RS422 or currentloop inputs
> Outputs: 2 analogue outputs (optional) / 4 RS422 or currentloop (NMEA 0183)
> Dimensions: 483 X 133 X 91
> Operating temperature: 30 to 60 deg. C.
> Moisture protection IP40
> Humidity 5 to 90%
> EMC EN 50081-1 class B, EN 50082-2

Use With:
> OMC-127 dual analogue outputs 4..20mA or 0…1 Volt
> OMC-129 remote brightness control
> OMC-2973 19” table top housing

Home : About Us : Q&A Support : Terms & Conditions : Shipping : Contact Us : Sitemap

If you experience any problems with this site, please e-mail them to us.

Tel: +44 (0)1787 883138 Fax: +44 (0)1787 883139